Models LTX-18/22/30 Forktruck Service Lifts
18,000, 22,000 & 30,000 lb. Capacity 2 Post Material Handling Service Lift Get More Info18,000, 22,000 & 30,000 lb. CAPACITY TWO POST MATERIAL HANDLING SERVICE LIFTS
The LTX & MHX are forktruck service lifts. This new patented product is the only vehicle service lift capable of servicing traditional fork lifts, order pickers, reach trucks & electric pallet jacks.
Features & Images
Heavy duty column construction with direct drive cylinders, direct drive lifting rods and stainless steel hydraulic lines are built for decades of low-maintenance operation.
LiftPoint’s large and stable footprint measures 30” wide by 24” and is made of 3⁄4” thick plate. LiftPoint’s large base gives stability to the lift, while distributing the load to the shop floor.
LiftPoint’s welded steel carriages roll on eight double sealed, self-lubricating, steel ball bearing rollers, and incorporates a thrust load bearing design to dissipate the thrust from heavy counterbalanced forklifts.
ALL position 1” thick mechanical locks on BOTH carriages engage the full length of travel. Available with optional single point air lock release, requires air to lift.
The LTX offers FULL unobstructed underside access for material handling equipment for all repairs, takes up minimal bay space and leaves wheels hanging free for tire, brake or any other necessary repairs.
The inspiration behind the design of the LTX Series is a forklift’s mast which provides a degree of stability and reliability that other lifts cannot.
Lift Design
- LiftPoint columns are constructed of 3⁄4” thick forklift masts, for a lifetime of trouble-free service and reliability.
- Each LiftPoint carriage rolls on 8 double-sealed, self-lubricating, steel ball bearing rollers.
- Two 4” heavy duty cylinders (one in each post) make for a safe and stable lift.
- Low profile (1.5”) three stage swing arms fit under most material handling equipment (lower profile adapters available).
- Adjustable three stage arms ensure compatibility with fleets of various models of traditional fork lifts, order pickers, reach trucks & electric pallet jacks.
- Easily adjustable overhead stainless steel hydraulic lines can be set at any height (or routed in floor) to accommodate even the tallest masts.
Safety Systems
- Patented, infinite-position, internal hydraulic safeties backed by external pressure compensated flow controls and velocity fuse valving.
- LiftPoint lifts feature all position mechanical safety locks in both columns, starting at the ground, to full lifting height.
- Swing arm restraints automatically engage upon lifting and automatically disengage when the material handling equipment has been fully lowered.
- Electric safeties prohibit overloading of system.
- The best, and most inclusive warranty in the business; 25 years structural, 10 year mechanical, plus limited lifetime cylinder seal warranty.
Lift Operation
- Hydraulic fluid is pumped between the two cylinders through the overhead (or optional in-floor) stainless steel hydraulic lines.
- Patented hydraulic synchronization system ensures even lifting and eliminates the need for restrictive height overhead covers, cables, pulleys, equalizer chains or obstructive floor plates.
- To raise the carriages, the LTX Series uses a true piston and ram system, direct drive lifting rods and high quality U.S. power systems for smooth, stable, reliable lifting.
- LiftPoint’s welded steel carriages roll on eight double sealed, self-lubricating, steel ball bearing rollers, and incorporates a thrust load bearing design to dissipate the thrust from heavy counterbalanced traditional fork lifts, order pickers, reach trucks or electric pallet jacks.
- LiftPoint bearings last longer, with less friction and wear than competitive lifts using plastic slide blocks which need constant greasing and maintenance.
What other lift offers a 25 year structural warranty?
LTX-30 Gallery
Lift Options
Optional Outrigger and Mast Adapter Drive-thru adapters enable lifting from pallet jack forks, outriggers or under the mast.
Optional TD-350 Tire Jack Enables Techs to Safely Remove Tires for Wheel & Brake Service
Get Your Techs Off The Ground. Total Underside Access Allows Techs to Service Components Without Getting On Hands & Knees.
Lift Specifications
| Model: | LTX-18/LTX-22 |
| Capacity: | 18,000/22,000 lbs. |
| Motor Rating: | 4 HP/208-230V, Single-phase (3ø optional) |
| Synchronization: | Hydraulic fluid displacement using no chains, cables, or overhead obstructions |
| Arm Pad Height: | 1 1⁄4″ min. |
| Lifting Height: | 6′ under arm |
| Overall Width (adjustable): | 12′ 7 1⁄2″ |
| Weight: | 3,200 – 3,800 lbs. |
| Concrete Floor Requirements: |
Wide Base: 5 1⁄2″ of 4,000 psi concrete Standard Base: 6 1⁄2″ of 4,000 psi concrete |
| Standard Base: | 6 1⁄2″ of 4,000 psi concrete |
| Anchoring System (included): | (16) 3⁄4″x6″ bolts |
| Mechanical Safety Locks: | Automatic; multi-position starting @ 5″ off the floor |
| Hydraulic Safety Systems: | Automatic; infinite-position |
| Swing Arm Restraints: | Automatic upon ascent |
| Cylinders: | 2 (1 per column) |
| Drive System: | Direct drive (using no cables or chains) |
| Lifting Speed: | 60 seconds (faster with lighter load) |
| Thrust & Guide Bearings: | (16) 4″ diameter, (8 per carriage) double sealed, self-lubricating ball bearing rollers |
| Floor Access Between Posts: | Clear and unobstructed |
| Warranty: | 25 years structural |
Download the Specifications PDF
| Model: | LTX-30 |
| Capacity: | 30,000 lbs. |
| Motor Rating: | 5 Hp, 220 Vac, 3 Phase |
| Synchronization: | Hydraulic fluid displacement using no chains, cables, or overhead obstructions |
| Arm Pad Height: | 1-5/8″min |
| Lifting Height: | 6′ under arm |
| Overall Width (adjustable): | 15′ |
| Width between Posts: | 12′ |
| Weight: | 8,850 lbs. |
| Column Height: | 10′-1 1/2″ |
| Standard Base: | 12″ of 4,000 psi concrete |
| Anchoring System (included): | 1″ Dia X 10″ Lg Wej-It Anchors in 4000 Psi Concrete |
| Mechanical Safety Locks: | Multi-Position Every 6″ |
| Hydraulic Safety Systems: | Automatic: All Position |
| Swing Arm Restraints: | Automatic upon ascent |
| Cylinders: | 2 (1 per column) |
| Drive System: | Direct drive (using no cables or chains) |
| Lifting Speed: | 60 seconds (faster with lighter load) |
| Carriage Bearings: | (16) 5″ diameter, (8 per carriage) double sealed, self-lubricating ball bearing rollers |
| Thrust Bearings: | (8) 4″ Diameter (4 per Carriage) Double Sealed Self Lubricating |
| Floor Access Between Posts: | Clear and unobstructed |
| Warranty: | 25 years structural |
SAFE LIFTING IN 60 SECONDS!!!
The Only Lift Built to Service Forklifts, Pallet Jacks, Reach Trucks & More
Solid, SAFE & PROVEN
• Speeds Repairs & Boosts Fleet Reliability
• Improves “PM” Compliance
• Reduces Parts Expenses
• Reduces Injuries & Improves Ergonomics
• Reduces Workman’s Comp Exposure
Get More Information